Keep this article with your boiler’s official manual. For firmware-specific instructions or revised error codes, scan the QR code on the boiler’s side label or visit the Lambert support portal.
A: This is a timed service reminder (e.g., every 2000 running hours). It does not lock the boiler. Call a technician at your convenience. 14. Disposal and Environmental Compliance The Lambert LX 24 FI contains electronic components, copper, aluminium, and plastic. At end of life, do not discard with household waste. Return it to an authorised WEEE collection point or contact Lambert’s take-back scheme. lambert lx 24 fi instrukcia
| P-code | Function | Default | Adjust range | |--------|----------|---------|---------------| | P01 | Maximum CH power | 24 kW | 5–24 | | P02 | Pump post-circulation time | 3 min | 0–10 | | P03 | Antifreeze activation temp | 5°C | 3–10 | | P05 | DHW preheating (comfort) | 0 (off) | 0/1 | | P08 | Minimum CH power | 5.4 kW | 3–10 | | P10 | Fan speed offset | 0 | -5 to +5 | Keep this article with your boiler’s official manual
Press and hold the Mode/Reset button for 3 seconds until the error disappears. If the error returns within 24 hours, call a technician. 10. Flue System Requirements The Lambert LX 24 FI is approved for concentric flue (60/100 mm) or twin pipe (80/80 mm) with adaptor. It does not lock the boiler
A: Typically a dirty DHW plate heat exchanger or low flow rate. Clean the inlet filter first.