Din 16742 — - Tg5
Title: Precision Requirements for Injection Moulded Parts – Tolerance Grade TG5 per DIN 16742
| Standard / Grade | Equivalent to TG5? | Key Difference | |----------------|--------------------|----------------| | DIN 16901 (110) | No – 110 is coarser (~TG8). TG5 is ~130-140 range in old standard. | Old 110 is general purpose; TG5 is precision. | | ISO 20457 (P3) | Roughly equivalent | ISO P3 is similar but less detailed on geometric tolerances. | | VW 13010 (Group 4) | Slightly tighter | TG5 is similar to VW13010’s higher precision group. |
Within this standard, represents a high-precision classification. It is typically applied to parts that require tight functional fits, consistent assembly behavior, or superior geometric stability without resorting to post-molding machining. din 16742 - tg5
While the full standard includes complex tables based on nominal size ranges, TG5 can be summarized as:
| Nominal Size Range (mm) | Approximate Tolerance Class TG5 (mm) | Practical Interpretation | |------------------------|--------------------------------------|---------------------------| | 0 – 10 | ±0.05 to ±0.08 | Very tight; requires stable process & precision mold. | | 10 – 50 | ±0.08 to ±0.12 | Typical for functional bearing/shaft fits. | | 50 – 160 | ±0.12 to ±0.20 | Demanding for larger parts; watch for warpage. | | 160 – 400 | ±0.20 to ±0.35 | High precision for large geometries; design must minimize stress. | Note: Actual values depend on material shrinkage, part geometry, and feature type (free dimension vs. fixed dimension). Always refer to the latest DIN 16742 tables. | Old 110 is general purpose; TG5 is precision
DIN 16742 is the German industry standard governing . It replaces the older standards DIN 16901 and VW 13010, providing a unified, modern system for defining form, orientation, and dimensional accuracy.
For critical features, it is strongly recommended to specify TG5 only on functionally relevant dimensions, while allowing coarser grades (e.g., TG8–TG10) on non-critical geometries to balance cost and performance. and process stability. When correctly applied
is the benchmark for high-precision injection-molded plastic components without secondary machining . It demands excellence in mold making, material science, and process stability. When correctly applied, it delivers robust, dimensionally consistent parts suitable for demanding automotive, medical, and industrial applications.
