Manual - Ch-899 Chouchin Radio Controlled Clock

This can take anywhere from 3 to 12 minutes. If it finds the signal, the hands will automatically fast-forward to the correct time. 2. Manual Setup (If the signal is weak)

The clock is now in "receiving mode," searching for the radio signal.

Whether you’ve just unboxed your CH-899 Chouchin or finally decided to fix that blinking time display, setting up a radio-controlled clock is actually pretty straightforward. Since these clocks rely on the DCF (Germany) ch-899 chouchin radio controlled clock manual

radio signals to stay accurate, the goal is to get it to "talk" to the tower.

If the clock is acting glitchy, use a paperclip to press the Reset hole. This clears the memory and starts the auto-sync process from scratch. 3. Tips for Success Night Sync: This can take anywhere from 3 to 12 minutes

Pressing this forces the clock to try searching for the radio signal again. Try placing the clock near a window facing towards the signal transmitter while doing this.

If the hands don't move after 15 minutes, you might be in a "dead zone" (near thick stone walls or heavy electronics). M.SET Button: Manual Setup (If the signal is weak) The

Press and hold this for a few seconds to move the hands manually to the current time. REC Button:

Open the back compartment and insert fresh AA batteries (alkaline is best). The Auto-Sync:

Radio signals are strongest at night. If it doesn't set during the day, leave it by a window overnight; it usually corrects itself by 4:00 AM.