# 3. Pull the manifest log "Downloading manifest from $MANIFEST_URL ..." if command -v curl >/dev/null 2>&1; then MANIFEST_JSON=$(curl -fsSL "$MANIFEST_URL") elif command -v wget >/dev/null 2>&1; then MANIFEST_JSON=$(wget -qO- "$MANIFEST_URL") else log "Neither curl nor wget is present – cannot continue." exit 1 fi
# 10. Record success (this line runs only for the TWRP‑case *after* the device # comes back online; for fastboot it runs immediately after flashing) log "Patch $REMOTE_PATCH_VERSION applied successfully – persisting state." cat > "$STATE_FILE" <<EOF
log "Manifest reports patch version: $REMOTE_PATCH_VERSION (type: $PATCH_TYPE)"
It assumes you have root access (or a custom recovery such as TWRP) and that you are comfortable running a small shell script at boot. – Flashing or patching firmware can brick the device if something goes wrong. • Always keep a full backup (TWRP backup, Odin‑saved stock firmware, or a complete “nandroid” image). • Test the script on a spare device first. • Make sure the patch you are applying is exactly for the A127F U7 build (same region, carrier, and base‑band version). 1. High‑level flow | Step | What the script does | Why it matters | |------|----------------------|----------------| | A. Detect current build | Reads ro.build.display.id (or /system/build.prop ) to know the exact firmware version you’re on. | Prevents re‑applying an already‑installed patch. | | B. Query a remote “patch‑manifest” | HTTPS GET to a small JSON file you host (e.g., https://my‑patch‑server.com/a127f_u7/manifest.json ). | Central place to announce new patches, version numbers, and download URLs. | | C. Compare versions | If the manifest reports a newer patch_version than the one stored locally, the script proceeds. | Guarantees you only download when needed. | | D. Download the patch | Uses curl / wget to fetch a signed ZIP (or a fastboot‑compatible tar). | The patch file contains only the delta (difference) files, not a full ROM. | | E. Verify integrity | Checks the SHA‑256 hash (provided in the manifest) and optionally GPG‑signatures. | Prevents corrupted or malicious payloads. | | F. Apply the patch | • If it’s a TWRP‑flashable ZIP , the script calls twrp install . • If it’s a fastboot image, the script reboots to fastboot and runs fastboot flash … . | Handles the two most common Android flashing paths. | | G. Record success | Writes the new patch_version to /data/local/tmp/auto_patch_state.json (or another persistent location). | Guarantees the next run knows it’s up‑to‑date. | | H. Reboot | A clean reboot after flashing ensures the new binaries are loaded. | Prevents “partial‑flash” glitches. | 2. Minimal working example (Bash) Below is a complete, self‑contained script you can drop into /system/bin/auto‑patch.sh (or any location on the /data partition if you prefer). Make it executable ( chmod +755 ) and add it to /etc/init.d/99auto‑patch (or the equivalent init‑rc file for your Android version) so it runs on every boot. a127f u7 auto patch
# Cleanup rm -rf "$TMP_DIR"
# 1. Get current build id (e.g., "U7-20230915") CURRENT_BUILD=$(getprop ro.build.display.id 2>/dev/null) if [ -z "$CURRENT_BUILD" ]; then log "Cannot read current build id – aborting." exit 1 fi log "Current firmware: $CURRENT_BUILD"
# 6. Create temp folder mkdir -p "$TMP_DIR" PATCH_FILE="$TMP_DIR/patch_$REMOTE_PATCH_VERSION.zip" – Flashing or patching firmware can brick the
adb shell "su -c 'cat <<EOF > /system/etc/init.d/99auto-patch\n#!/system/bin/sh\n/data/local/tmp/auto-patch.sh\nEOF\nchmod 755 /system/etc/init.d/99auto-patch'" If you are on Android 10+ with init.rc you can create a small service instead:
if [ $? -ne 0 ]; then log "Patch download failed – aborting." rm -rf "$TMP_DIR" exit 1 fi
log "Auto‑patch process finished. Rebooting now…" reboot • Make sure the patch you are applying
# Tell TWRP what to do (via its command file) echo "--update_package=/cache/recovery/auto_patch.zip" > /cache/recovery/command
log "New patch detected! Preparing to download…"
# Example fastboot commands (adjust to your actual zip content): fastboot flash boot "$PATCH_FILE/boot.img" fastboot flash system "$PATCH_FILE/system.img" fastboot flash radio "$PATCH_FILE/radio.img" fastboot reboot else log "Unknown patch_type '$PATCH_TYPE' – aborting." rm -rf "$TMP_DIR" exit 1 fi
# 9. Apply the patch if [ "$PATCH_TYPE" = "twrp_zip" ]; then # -------------------------------------------------------------- # TWRP approach – we reboot into recovery and let TWRP flash it. # -------------------------------------------------------------- log "Rebooting into TWRP to install ZIP …" # Store path in a known location that TWRP can read after reboot. cp "$PATCH_FILE" /cache/recovery/auto_patch.zip
# ---------- CONFIGURATION ---------- PATCH_SERVER="https://my-patch-server.com/a127f_u7" MANIFEST_URL="$PATCH_SERVER/manifest.json" STATE_FILE="/data/local/tmp/auto_patch_state.json" TMP_DIR="/data/local/tmp/auto_patch_tmp" LOG_TAG="AutoPatch"